How to open the air purifier correctly?
Our designers have long thought of a convenient and simple operation method that allows everyone to easily and easily open the enjoyable air purifier. Next, Xiaohang will tell you how to open the air purifier correctly.
Step 1: Open the top of the package
The next step is to focus on the blackboard and witness the miracle.
Step 2: Pull the front of the carton apart
Is it amazing, I didn’t expect it…
Step 3: Take the top and bottom foam off
Step 4: Remove the dust cover
Step 5: Pull the machine out
Don’t forget that there is a box on the top foam…
Step 6: Remove the accessory box and open it
Step 7: Remove the power cord,
And connected to the lower-left corner of the back of the machine
Be careful here to make sure the connection is secure. Another point is that the power cord should be connected to a separate outlet to keep the machine stable. In addition, in order to ensure the quality of the filter, the filter of the new machine has a protective film.
Step 8: Remove the two filters
Step 9: Peel the filter screen
Be careful to tear open the filter package and never use sharp objects to prevent damage to the filter.
Step 10: Install the filter in the sequence
As shown, the scented filter notes that the handle is on the front.
As shown, the HEPA filter notes that the handle is on the front.
As shown in the figure, the buckle of the primary filter should be fastened.
Step 11: Attach the front cover
Step 12: Press the power button to start working
The daily maintenance of the air purifier requires only four actions.
Action 1: Cleaning the surface of the machine
Turn off the power, unplug the plug, and wipe the surface of the machine with a towel.
Note: Be sure to use a diluted neutral detergent. Do not use abrasive powder, alkaline cleaner, kerosene alcohol, bleach or thinner.
Action 2: Cleaning the primary filter
Can be washed or cleaned with a soft brush
Note: Please make sure to put it back into the machine after it is dry, and remember to press and hold the corresponding filter prompt button to reset.
Action 3: Replace the HEPA filter
If the HEPA filter reaches its end of life, please purchase a new filter to replace it. Do not wash or expose the filter.
Note: After the filter is replaced, please remember to press and hold the corresponding filter prompt button to reset.
Action 4: Replace the scented filter
If the odor filter reaches the end of its life, please purchase a new filter to replace it. Do not wash or expose the filter.
Note: After the filter is replaced, please remember to press and hold the corresponding filter prompt button to reset.
Contact us for more products and discounted prices
Helen:
+86 13922346046
info@olansiglobal.com
https://www.olansiglobal.com