Yes or No: Say goodbye to the “small entanglement” in the use of air purifiers
After buying back an air purifier, many families are unpredictable in their position. Some people say that it is more space-saving to put the corners on the wall; others say that it is better to form a circular airflow in the middle of the house. Which statement makes more sense?
Place it in the corner or close to the wall, so it can save space, but it will also block the air outlet or air inlet. We know that the final purification effect is directly related to the amount of air entering and the amount of air. The blocking of the wall will inevitably greatly reduce the air volume, so this method of placement is wrong.
Is it necessary to put the air purifier in the middle of the room? In fact, there is no need for this. The air purifier does circulate the air in the entire space. However, the airflow trajectory has little effect on the final effect. Usually, the air purifier is kept at a distance of 30 cm from the wall and furniture.
Recommendation: When placing, be sure to pay attention to the air inlet and outlet of the air purifier. Do not let the walls and furniture block them, at least 30 cm of air purifier.
Multi-purpose machine or specific room?
Put the living room in the day, but the bedroom in the evening, and put the cooking in the kitchen. This kind of multi-purpose idea has won the approval of consumers, but in fact not all air purifiers are suitable for moving and using.
When the applicable area of an air purifier is large, such as the Olansi Pro L mentioned in the video (the applicable area is 49-84m2), it can be multi-purpose, and it can be flexible with its own casters. Move to different rooms for use. Other Olansi models with casters, such as the 550E and 603, have specifically taken into account the need to move.
However, if the applicable area of a machine is small overall, it is not suitable for use in an office or a large living room, and a smaller bedroom is the best place to function.
What if the applicable area is not indicated in the manual? According to the formula of the new national standard “Applicable area = CADR* (0.07~0.12)”, we can make a simple estimation.
Recommendation: Estimate the applicable area of the air purifier by CADR* (0.07~0.12). If the upper and lower spans are large, you can use it in one machine. If the whole is small, it can only be used in small rooms.
High speed or low speed?
Air purifiers usually have multiple gears from high to low, so when should I use the gear? Is it always driving at the highest level, or is it only using a lower power-saving gear?
We recommend that when you first turn it on, set it to the highest level, quickly reduce the indoor pollutant concentration, and then switch to low gear, which is both efficient and energy-efficient.
So how long does it take for the highest level of air to reach the level of excellence? To this end, the reporter collected three different brands of air purifiers from the citizens’ homes and chose to do the tests in a 30-square-meter home living room. The initial value of PM2.5 is around 160μg/m3, and the PM2.5 is reduced to 35μg/m3 (the air quality level is excellent).
The final result shows that the No. 1 unit Olansi cleans indoor air quality from moderate pollution to an excellent standard in just 9 minutes and 04 seconds with an ultra-high CADR value (700 m3 air per hour). The 2nd and 3rd machines can be tested for up to half an hour.
The tests in the video are only for specific scenes. In the face of a variety of indoor environments, it is better if the air purifier has an automatic adjustment function. For example, the Olansi Pro, Sense, and E series all come with an Auto option, and the electronic sensor automatically adjusts the wind speed based on particles and odors, which makes it even more worry-free to use.
Suggestion: When opening the air purifier at the beginning, first turn it on for the most high-end position for about half an hour, then switch to the low-speed gear. If you have automatic adjustment, you can set it to smart mode directly.
After the air reaches the standard
Shut down immediately or continue to boot?
Can the air purifier be turned off when the indoor air reaches the standard? Anyway, the doors and windows are closed, and the outdoor smog should not enter.
In the video, we can see that when the indoor PM2.5 drops below 35μg/m3, the air purifier is turned off, and after 14 minutes, PM2.5 rises to 50μg/m3. This proves that even when the outdoor fog is severe, even if the doors and windows are closed, the PM2.5 concentration in the house will gradually increase.
Is that going to be turned on 24 hours a day? This is not necessarily the case. Do you want to continue to boot, you need to look at the degree of outdoor pollution and the sealing of doors and windows, it sounds a bit difficult? Don’t worry, in addition to the smart mode mentioned above, we can also use professional testing to understand the specific air quality conditions in the home.
Click on “Menu Bar – Activity Zone – Schedule Air Detection” to enjoy the on-site inspection service provided by the Olansi Air Purification Consultant. In addition to detailed data reports, you can learn more effective tips.
Recommendation: Whether the air quality can be shut down after the standard is reached depends on the specific situation. It is more reliable to judge by the intelligent mode of the air purifier or the professional testing service.
Flower fist embroidered leg or hidden?
You may have this doubt: the mute file of the air purifier (usually the lowest gear), although the noise is small, the wind speed is also reduced a lot, can it really play a role in purifying the air? If you open the mute file, will you not pay attention to it? PM2.5 has risen again?
We turned on the lowest level of the No. 1 ( Olansi) and the silent mode of the No. 3 machine. The initial value of PM2.5 is about 150μg/m3 and the test time is 12 minutes.
The final result proves that the lowest level not only maintains the indoor air level but also decreases the PM2.5.
In comparison, the Olansi Air Purifier’s lowest performance is particularly outstanding, because Olansi pays special attention to the ability of the lowest gear in research and development because this is the most commonly used gear in people’s lives. And HEPASlient’s patented technology is the key to doing all this: to achieve optimal air purification efficiency at the lowest wind speed.
Recommendation: After the air quality is up to standard, the lowest level can be turned on. It not only keeps the pollution concentration to a minimum but also maximizes mute and energy saving.
Contact us for more products and discounted prices