Tag Archives: air purifier filter

Olansi antibacterial antivirus filter

Defend against COVID-19:Olansi antibacterial antivirus filter

Posted on by

Olansi antibacterial antivirus filter

In this special period, it has become a consensus among the people to go out and wear masks. Masks block the virus, but you ca n’t wear them at home, how can you ensure healthy breathing indoors? Some families have bought air purifiers, but most can only filter dust, not sterilize. After a period of time, the filter element is filled with dust, and if it is not replaced in time, bacteria will breed, and the purifier has become a major source of pollution. So is there a filter that is both sterilized and resistant to viruses?
This is a silver ion composite filter containing anti-bacterial and anti-virus!

Olansi antibacterial antivirus filter

1. Silver ion can cleave new coronavirus

Silver is a natural inorganic antibacterial disinfectant, and the silver ions it releases play a role in sterilization and disinfection. In view of the fact that the new coronavirus is currently not treated with special drugs, silver ion can be used as another way to prevent the new coronavirus.

The anti-viral ability of silver antibacterial materials In the article “Efficient and rapid cracking of SARS coronavirus and other microorganisms by metal catalysts”, the research team compressed silver / alumina into discs and dropped Vero cells that support SARS coronavirus proliferation On the disc, the virus toxicity on the plate was compared after 5 min and 20 min, respectively.
The results showed that the toxicity of SARS coronavirus in Vero cells decreased to a very low level at 5 minutes of exposure. At 20 minutes, the virus was not found to have toxicological effects on cells. However, in the corresponding control group, the virus showed a typical cytotoxic effect, which shows that silver / alumina has a strong antiviral ability.

The paper “Discussion on the Inactivation Effect of Nanosilver on Influenza Virus H3N2” also concluded through experiments: Nanosilver has a direct inactivation effect on influenza virus H3N2. The oxidizability of active silver ions> nano silver, that is to say, the active silver ions have a better direct inactivation effect on influenza virus H3N2.
Silver ion was recommended as a disinfectant during the SARS period: Silver ion was listed as one of the disinfectants by the No.302 Hospital of the People’s Liberation Army of the Ministry of Health, General Logistics Department.

Olansi antibacterial antivirus filter

2. Aussie antibacterial and virus removal composite filter

The antibacterial and antiviral filter newly developed by Oransi has newly added copper and silver ion antiviral materials to inhibit the proliferation of bacteria and mold adhering to the surface of the filter and provide clean and fresh air indoors.
The first layer: copper and silver ion anti-virus PET skeleton

Newly developed Cu2Ag + antibacterial and antiviral technology, using PET skeleton as a carrier, carrying copper and silver ions, and then synergizing with medical H13 grade HEPA filter to play the role of bacteria isolation, sterilization and antivirus. SARS (atypical pneumonia), H7N9 (avian influenza, coronavirus), H1N1 (respiratory influenza virus) and other viruses have obvious removal effects.
The second layer: H13 medical grade HEPA

The H13 medical grade HEPA filtration accuracy is less than 0.3 microns, which can capture and reduce 99.97% of fine particulate matter in the air, such as pollen, pollutants, and allergens, and reduce the carrier of bacteria and viruses in the air.

The third layer: modified activated carbon

Modified activated carbon can filter out formaldehyde / VOCS and other gaseous pollutants to keep the air fresh.

Olansi antibacterial antivirus filter

3. The principle of silver ion sterilization and virus removal

The first step: effect on enzymes and amino acids in microorganisms
Silver ions are first adsorbed on the surface of the bacterial cell wall, destroying some of its physiological functions. When the silver ions are aggregated and reach a certain limit, they penetrate the cell wall and enter the interior, staying on the cytoplasmic membrane, inhibiting the activity of enzymes in the cytoplasmic membrane Cause the death of microorganisms such as bacteria.
The second step: destroy the barrier structure of microorganisms
The silver electrolyte can destroy the cell membrane, loosen the cell membrane, rupture the cell membrane, and leak the cytoplasm. The bacteria are then destroyed. Silver ions can penetrate into cells and interact with protoplasts, so that the protoplasts contract and condense and come out.
The third step: destroy the DNA molecules of microorganisms
Silver and other metal ions can also act on specific sites on bacterial DNA molecules, destroying the DNA molecular structure. The research by Thuman and Gerba pointed out that silver ions can coagulate nucleic acids, causing cross-linking of DNA molecules, or catalyzing the formation of free radicals, which leads to the breaking of chemical bonds on DNA molecules.

Olansi antibacterial antivirus filter

Welcome to contact us.

Mob: +86 13922346046(Helen)
Email: helen@olansiglobal.com

air purifier,air purifier home,air purifier filter

How to improve the air quality inside the car in the haze

Posted on by

How to improve the air quality inside the car in the haze

air purifier,air purifier home,air purifier filter

Driving in the haze, traffic is more congested, and people stay in the car for longer than ever. In a seemingly closed space, the degree of pollution is not worse than the outside, so it is necessary to prevent flooding in the car. Then, in this environment, in addition to paying attention to conventional safety, how do car owners make the air in the car more ‘clean’?

First, close the window, open the inner loop
For many people, there is a car travel, this relatively closed space can avoid contact with the “ten face crouching” to some extent, the car window is closed at the first time when driving on the road. In fact, in addition to closing the window, there is one more step to be aware of, that is, to open the inner loop.

Opening the outer loop is the same as opening the window, so that the air outside the car enters the car. That is to say, the air passage outside the vehicle and the inside of the vehicle is circulated, and the wind blown by the fan comes from outside the vehicle. Even if the fan is not blown, the airflow is still sucked into the vehicle while the vehicle is running, and the fresh air in the vehicle is replenished. Therefore, in foggy weather, even if the doors and windows are closed, high concentrations of suspended pollutants or respirable particulate matter can enter the vehicle through external circulation.

The inner circulation is to close the airflow passage inside and outside the vehicle, forming a circulation of air inside the vehicle, effectively preventing external dust and harmful gases from entering the vehicle, and blocking harmful exhaust gas discharged from the preceding vehicle in a dense area of the vehicle.

Therefore, in the fog, when you drive, you not only need to close the doors and windows, but also try to open the internal circulation system of the air conditioner inside the car. For many models with automatic air conditioning, the vehicle will default to the outer loop when starting, so don’t forget to switch to the inner loop. Of course, if the circulation in a long time will cause the air in the car to not circulate, if it is running at a high speed or in the car for too long, then it will open for a while and let the outside air come in.

Second, regular cleaning and replacement of car air filter
When the smog is heavier, many people will wear masks for themselves. After they have been used, they should be cleaned in time or thrown away. The car actually has a “mask”, that is, the engine’s air intake filter and air conditioning filter. These two items are like the air protection umbrella of a car, which can effectively reduce the entry of pollutants into the car through heating ventilation and air conditioning systems, and prevent the inhalation of harmful pollutants when driving.

However, in the polluted environment for a long time, the engine’s air intake filter and air-conditioning filter will also absorb a lot of impurities and dirt. Too much dirt will deposit on the filter element, which will not only reduce the intake efficiency, but also reduce the engine power and air conditioning. . The dirt accumulated on the filter element will breed bacteria and cause mildew, which will cause air conditioning odor, which not only affects the ride comfort, but also poses a threat to health. Therefore, the engine intake filter of the car should be replaced regularly. At the same time, the air conditioner filter is the first door of the car air conditioner. The air quality of the car is also very large. The air conditioning system should be cleaned regularly and the air filter should be replaced according to the maintenance manual.

Under normal circumstances, change every 15,000 km. Of course, in places where air pollution is more serious, it should be replaced every 10,000 kilometers or less. Generally, 4S shops can operate.

Third, install car air purifier
The car does not have its own air purification system. It can purchase an in-car air purification device. After installation, it can eliminate the odor, toxic and harmful gases, bacteria and viruses in the car.

Fourth, do not smoke in the car
Cigarettes, cigars and pipes produce PM2.5 fine particles in incomplete combustion and are one of the main sources of indoor PM2.5.Many people like to smoke in the car. However, the fog can not open the window to ventilate, smoking is equal to the PM2.5 index in the car, so try not to smoke in the car.

Olansi Healthcare  Industry  portable air purifier is willing to work with more families to further study and manage family indoor issues and contribute to more family health.

If you are interested in this, please contact us for more products and preferential prices
Helen:
+86 13922346046
info@olansiglobal.com
https://www.olansiglobal.com

air purifier filter,electronic hepa air purifier,table top air purifier

Why does the air freshener purify the air?

Posted on by

Why does the air freshener purify the air?

air purifier filter,electronic hepa air purifier,table top air purifier

Industrial dust, harmful gases in the city, and the use and smoking of air conditioners in the home all have different levels of pollution to the air. With the improvement of people’s living environment requirements, it is hoped that there will be a clean and small environment in the home room, and the air freshener will come into being under such circumstances. The function of the air freshener is generally accomplished by a multi-stage dust removal device such as activated carbon, high-voltage static electricity, and dust collecting device. It drives the blades through the electric motor in the freshener to make the indoor air flow and circulate, so that the air is freshly shaken and filtered to achieve the purpose of fresh air. In addition, the air freshener is cleaned from coarse to fine in structure, that is, the air first filters out the smoke, smoke and odor in the air through the filter net, and also adsorbs the particulate dust through a composite dust removal method such as high-voltage static electricity. Finally, negative ions are generated by the negative ion generator to make the air fresh and pleasant, and the effect of air purification is achieved. The air freshener can be classified into an air purifier and an air negative ion generator according to functions. When selecting, it should be considered according to the size of the indoor space and the amount of air circulation of the air freshener. This can be selected in accordance with the 1 hour circulating air volume 3 times the indoor space. If the room of 20 square meters is 2.6 meters high, the circulation of the air cleaner should be 150 cubic meters / hour.

If you are interested in this, please contact us for more products and preferential prices
Helen:
+86 13922346046
info@olansiglobal.com
https://www.olansiglobal.com

How to clean and maintain the air purifier filter

Posted on by

How to clean and maintain the air purifier filter

Everyone knows that air purifiers purify air pollution, mainly relying on the built-in purification filter. When the air purifier works for a period of time, the internal filter network will collect a lot of dust and bacteria, which will not only affect your health, but also affect the life of the filter, so pay attention to cleaning and maintenance. As for how to do it, let’s share with you some tips on how to clean and maintain the air purifier filter.
Air purifier filter cleaning tool / raw materials: water, rag, sunlight,

Air purifier filter cleaning steps

1. The front filter of the air purifier is generally responsible for filtering the dander, and the large particles can be cleaned with a rag or even washed according to the material requirements of the pre-filter. Or the vacuum cleaner removes the dust. When using the vacuum cleaner, be careful not to stick the suction port on the filter screen and keep a certain distance.

2, the main filter part needs to get the sun under the sun regularly, not only can prevent moisture and better maintain the filter adsorption and decomposition ability. Washing is not recommended unless otherwise stated.
Activated carbon filter: According to the frequency of use and pollution status, it is usually cleaned once every 1-2 months, and exposed for more than 24 hours, which helps to restore the active adsorption capacity of activated carbon itself.
HEPA filter: You can use a vacuum cleaner to absorb dust from the surface. It is usually cleaned once every 1-2 months, and the timing of cleaning can also be judged based on the accumulated usage time. If you find that the original white filter is black, be sure to replace it as soon as possible. Be careful not to scratch the surface of the filter.
Photocatalyst, cold catalyst: choose to dry by air
3. Deodorizing filter screen, if it has reached the technical level of water washing, it can maintain the purification efficiency by washing with water and shorten the cycle of changing the filter.
4. The ion generator is generally built-in and does not need to be cleaned. The better ionizer has higher working efficiency.

Air Purifier Maintenance Guide
1. Choose an appropriate place to place the air purifier, air circulation, and no obstructions around it. Do not put it in the corner. Do not approach water or flammable materials during use, and do not block objects from entering or exiting the air when in use.
2. Regularly check whether the power supply line is in good condition to ensure safe and good operation.
3, air purifier air inlet, the shell is easy to accumulate dust, should be wiped regularly with a damp cloth, but do not use gasoline, banana water, and other organic solvents to scrub, so as not to damage the general plastic shell. When the air purifier is in operation, do not approach its air inlet, where air pollution is relatively serious.

4. The air purifier is the same as the electric fan. After working for a period of time, when there is more dust on the fan, motor, and sensor, it should be cleared. Usually one quarter of cleaning and maintenance. You can refer to the instructions for proper disposal of dust and cleaning and maintenance of the odor sensor.
5. When the air purifier is not used, the filter should be cleaned, aired and dried, then put into the box and stored in a ventilated and dry place.
In the winter when air pollution is frequent, I hope that the air purifier filter can be cleaned and maintained.

Contact us for more products and discounted prices
Helen:
+86 13922346046
info@olansiglobal.com
https://www.olansiglobal.com